![]() 10/17/2017 at 16:20 • Filed to: None | ![]() | ![]() |
Surface piercing drives are the coolest/scariest things on the water
![]() 10/17/2017 at 16:21 |
|
Never heard of this and I’ve heard of boats before, in fact I’ve been on them, but this? It looks like magic and sorcery to me.
![]() 10/17/2017 at 16:23 |
|
pretty much. Same concept as the one bladed fan being the most efficient air mover, the rest of the blades are for balance and just add drag. Only the bottom, say, 90 degrees of the props are submerged and pushing water, the rest are free to spin in the air reducing drag, plus there are no skegs in the water causing drag. They are water mincers of deaths.
![]() 10/17/2017 at 16:26 |
|
So I assume this would require calm water to be most effective? How would it do in 2-3ft chop/waves?
![]() 10/17/2017 at 16:28 |
|
I get why this would be a beneficial setup but my god that’s terrifying.
![]() 10/17/2017 at 16:30 |
|
they can be pitched down, but the occasional cavitation aint no thang for these blades, they will just bite next chance they get.
![]() 10/17/2017 at 16:31 |
|
Im a little surprised it hasn’t been used as a villain death plot device yet.
![]() 10/17/2017 at 16:39 |
|
images will not quell your uneasiness
chop chop
![]() 10/17/2017 at 16:41 |
|
I never knew this was a thing. Quite interesting. Usually this isn’t considered a beneficial situation. Kinda like doing a never ending burnout in the sand with paddle tires I guess.
![]() 10/17/2017 at 16:44 |
|
if you want prop efficiency at high speeds, surface drives are the biz. You can swing a huge prop REALLY fast and still get decent efficiency. The strange stuff is when you see it on big ships like this
or this
![]() 10/17/2017 at 16:46 |
|
When I become a super villain, I’m totally getting that top boat.
![]() 10/17/2017 at 16:48 |
|
So you’re saying this wouldn’t make for a good ski boat?
![]() 10/17/2017 at 16:48 |
|
Nothing says villain like “powered by 4 huge brass mincers”
![]() 10/17/2017 at 16:53 |
|
I’ve never heard of this. More or less efficient than a jet?
![]() 10/17/2017 at 17:00 |
|
I’d have thought some sort of cavitation created by the blades entering the water would negate the advantages of less resistance of the out of water portion
but... I MIGHT not be a scientist
![]() 10/17/2017 at 17:05 |
|
well plus remember they are at the transom which should be the part of any boat still in contact with the water at any given moment, so there is a good chance the stay in the water a lot.
![]() 10/17/2017 at 17:32 |
|
Right. Like this would make for a perfect James Bond bad guy gets rid of someone who crosses him machine.
![]() 10/17/2017 at 17:41 |
|
That pic looks familiar...
![]() 10/17/2017 at 17:48 |
|
Your know these guys?
![]() 10/17/2017 at 17:49 |
|
No I used it like a month or so ago in one of my hydroplane posts. It’s probably one of the clearest pictures of how surface drive props work one can find.
![]() 10/17/2017 at 18:02 |
|
Jets are actually super inefficient, they just can run fast. These are way more efficient than jets.
![]() 10/17/2017 at 18:06 |
|
The more you know.
![]() 10/17/2017 at 18:34 |
|
0/10, needed 1000 foot long water ski rope. Skier died on impact.
But seriously, that is a cool video. I’ve never seen them actually in motion before.
![]() 10/17/2017 at 19:22 |
|
I love this video and surface drives. Over in southeast asia they run some pretty cool makeshift longtail motors on little skinny boats that FLY.
![]() 10/18/2017 at 00:02 |
|
I can only imagine this combined with a hydrofoil.
![]() 10/18/2017 at 10:18 |
|
With platforms RIGHT ABOVE THEM! And a back door at the waterline!